Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

Comparative absorption kinetics of seven active ingredients of Eucommia ulmoides extracts by intestinal in situ circulatory perfusion in normal and spontaneous hypertensive rats

Eucommia ulmoides Oliv. (E. ulmoides) is a valuable and nourishing medicinal herb in China that has been used in the treatment of hypertension. Given the fact that most traditional Chinese medicine is mainly used to treat disease, investigating the pharmacokinetics of traditional Chinese medicines in the pathological state is more useful than that in the normal state. However, the differences in the absorption kinetics of active ingredients of E. ulmoides extract between pathological and physiological conditions have not been reported. Therefore, in this study, the rat intestinal in situ circulatory perfusion model was used to investigate the differences in absorption kinetics of seven active ingredients of E. ulmoides extract in normal and spontaneously hypertensive rats, namely, genipinic acid, protocatechuic acid, neochlorogenic acid, chlorogenic acid, cryptochlorogenic acid, (+)-pinoresinol di-O-β-D -glucopyranoside and (+)-pinoresinol 4′-O-β-D -glucopyranoside. Our results indicate that the pathological state of spontaneous hypertension may change the absorption of active components of E. ulmoides extracts, and these findings may provide a reference for improving the rational use of E. ulmoides in the clinic.     

Comparative proteomic analysis of round and elongated spermatids during spermiogenesis in mice

Spermiogenesis in mammals is an exclusive process during which haploid round spermatids mature into spermatozoa in the testis. Any abnormality in the process of spermiogenesis may result in male infertility. The aim of the present study was to characterize the differentially expressed proteins between round and elongated spermatids in mice using label-free quantitative mass spectrometry. Of the 2411 proteins identified in this study, 333 were differentially expressed with a ≥10-fold change, including 208 upregulated proteins and 125 downregulated proteins in round spermatids relative to elongated spermatids. Gene Ontology analysis showed that these differentially expressed proteins were categorized into 10 types of subcellular localizations, 9 molecular functions, and were involved in 9 biological processes. All the identified proteins participated in 268 different pathways. In addition, ubiquitin-mediated proteolysis and the proteasome pathway, autophagy, lysosome, and apoptosis pathways were involved in the mechanism of spermiogenesis. Our data may provide valuable information for a better understanding of spermiogenesis and help improve the diagnosis and treatment of male factor infertility.     

13C chemical shift tensors in MOF α-Mg3(HCOO)6: Which component is more sensitive to host-guest interaction?

Metal–organic frameworks (MOFs) are a class of important porous materials with many current and potential applications. Their applications almost always involve the interaction between host framework and guest species. Therefore, understanding of host–guest interaction in MOF systems is fundamentally important. Solid-state NMR spectroscopy is an excellent technique for investigating host–guest interaction as it provides information complementary to that obtained from X-ray diffraction. In this work, using MOF α-Mg₃(HCOO)₆ as an example, we demonstrated that ¹³C chemical shift tensor of organic linker can be utilized to probe the host–guest interaction in MOFs. Obtaining ¹³C chemical shift tensor components (δ₁₁, δ₂₂, and δ₃₃, where δ₁₁ ≥ δ₂₂ ≥ δ₃₃) in this MOF is particularly challenging as there are six coordinatively equivalent but crystallographically non-equivalent carbons in the unit cell with very similar local coordination environment. Two-dimensional magic-angle-turning experiments were employed to measure the ¹³C chemical shift tensors of each individual crystallographically non-equivalent carbon in three microporous α-Mg₃(HCOO)₆ samples with different guest species. The results indicate that the δ₂₂ component (with its direction approximately being co-planar with the formate anion and perpendicular to the C−H bond) is more sensitive to the adsorbate molecules inside the MOF channel due to the weak C−H···O hydrogen bonding or the ring current effect of benzene. The ¹³C isotropic chemical shift, on the other hand, seems much less sensitive to the subtle changes in the local environment around formate linker induced by adsorption. The approach described in this study may be used in future studies on host–guest interaction within MOFs.     

Cobalt-Catalyzed Regio- and Stereoselective Hydroboration of Allenes

An efficient pincer-ligand-based cobalt-complex-catalyzed allene hydroboration affording Z-allylic boronates is described. The reaction demonstrates an excellent regio- as well as Z-stereoselectivity and a wide substrate scope that tolerates many functional groups. Based on solvent-assisted electrospray ionization mass spectrometry (SAESI-MS) studies, a rationale for the cobalt-catalyzed hydroboration involving the highly selective insertion of an allene into the Co−H bond to form Z-allylic cobalt intermediates is proposed.     

Heterotrimetallic Mixed-Valent Molecular Precursors Containing Periodic Table Neighbors: Assignment of Metal Positions and Oxidation States

A known trinuclear structure was used to design the heterobimetallic mixed-valent, mixed-ligand molecule [Co^II(hfac)₃−Na−Co^III(acac)₃] ( 1 ). This was used as a template structure to develop heterotrimetallic molecules [Co^II(hfac)₃−Na−Fe^III(acac)₃] ( 2 ) and [Ni^II(hfac)₃−Na−Co^III(acac)₃] ( 3 ) via isovalent site-specific substitution at either of the cobalt positions. Diffraction methods, synchrotron resonant diffraction, and multiple-wavelength anomalous diffraction were applied beyond simple structural investigation to provide an unambiguous assignment of the positions and oxidation states for the periodic table neighbors in the heterometallic assemblies. Molecules of 2 and 3 are true heterotrimetallic rather than a statistical mixture of two heterobimetallic counterparts. Trinuclear platform 1 exhibits flexibility in accommodating a variety of di- and trivalent metals, which can be further utilized in the design of molecular precursors for the NaMM′O₄ functional oxide materials.     

第三族金属氧化物离子对二氧化碳转化的红外光谱研究

本文利用红外光解离光谱研究了第三族金属氧化物离子对二氧化碳分子的转化机制. 研究表明，对于[ScO(CO₂)_n]⁺体系，在n≤4时，形成了溶剂化结构；在n=5时，形成了碳酸盐结构，实现了二氧化碳的转化. 对于[YO(CO₂)_n]⁺体系，需要4个二氧化碳分子就可以实现二氧化碳的转化. 而在[YO(CO₂)_n]⁺体系中，只发现了溶剂化结构，没有观察到碳酸盐结构. 理论计算表明，[YO(CO₂)_n]⁺体系拥有最小的溶剂化结构向碳酸盐结构转化能垒，[LaO(CO₂)_n]⁺体系拥有最大的溶剂化结构向碳酸盐结构转化能垒. 本文从分子水平揭示了不同金属氧化物离子对二氧化碳分子转化的影响规律.     

阴离子-π复合物(I-·C6F6)的成键分析

最近Anst?ter, et al. 发表了对阴离子-π复合物(I^-·C₆F₆)的第一个定量谱学测量[J. Am. Chem. Soc. 141, 6132 (2019)]，认为成键作用中相关作用占41%，静电作用占23%，得出相关作用占主导的结论. 本研究表明，该文献的“静电作用”中混入了Pauli排斥作用，后者在数值上抵消了前者的作用. 在复合物I^-·C₆F₆中，发现静电作用是相关作用的两倍多，因而阴离子-π复合物中仍应是静电作用占主导.     

基于混合空穴注入层的湿法制备高效蓝光热激活延迟有机发光二极管

在溶液法制备有机电致发光器件(OLEDs)的研究中, PEDOT∶PSS由于具有较好的成膜性与高透光性而常被用作器件的空穴注入层。但相关研究表明, PEDOT∶PSS本身稳定性较差以及功函数较低,这使得溶液法制备OLEDs的性能差且不稳定。蓝色作为全彩色的三基色之一,制备高效的蓝光器件对于实现高质量显示器件和固态照明装置必不可少。而目前溶液法制备蓝光OLEDs的器件效率普遍较差,针对此问题,本文利用传统的蓝光热激活延迟荧光发光(TADF)材料DMAC-DPS作为发光层,用溶液法制备了蓝光TADF OLEDs,通过在PEDOT∶PSS中掺杂PSS-Na制备混合空穴注入层(mix-HIL)来提高空穴注入层的功函数,研究其对于蓝光TADF OLEDs器件性能的影响。首先在PEDOT∶PSS水溶液中掺入不同体积的PSS-Na溶液,在相同条件下旋涂制膜,进行器件制备。通过观测各个实验组器件的电致发光(EL)光谱,发现掺入PSS-Na后器件EL谱存在光谱蓝移的现象,这是由于掺入PSS-Na水溶液后, mix-HIL层的厚度有所降低,使得在微腔效应作用下, EL光谱发生蓝移。通过对比各组器件的电流密度-电压-亮度(J-V-L)曲线及其计算所得器件的电流效率,结果显示随着PSS-Na的掺入,器件的亮度和电流都有所增大,器件的电流效率也得到了提升,当掺杂比例为0.5∶0.5(PEDOT∶PSS/PSS-Na)时提升幅度最大(亮度提升86.7%,电流效率提升34.3%)。通过在瞬态电致发光测试过程中施加或撤去驱动电压观测了器件EL强度的变化,分析了在混合空穴注入层/发光层(mix-HIL/EML)界面处的电荷积累情况。实验证明,通过在PEDOT∶PSS中掺杂PSS-Na制备mix-HIL获得了蓝光TADF OLEDs器件性能的提升,这是一个获得高效率溶液法制备OLEDs的可行方法。     

On-chip multiphoton Greenberger–Horne–Zeilinger state based on integrated frequency combs

One of the most important multipartite entangled states, Greenberger–Horne–Zeilinger state (GHZ), serves as a fundamental resource for quantum foundation test, quantum communication and quantum computation. To increase the number of entangled particles, significant experimental efforts should been invested due to the complexity of optical setup and the difficulty in maintaining the coherence condition for high-fidelity GHZ state. Here, we propose an ultra-integrated scalable on-chip GHZ state generation scheme based on frequency combs. By designing several microrings pumped by different lasers, multiple partially overlapped quantum frequency combs are generated to supply as the basis for on-chip polarization-encoded GHZ state with each qubit occupying a certain spectral mode. Both even and odd numbers of GHZ states can be engineered with constant small number of integrated components and easily scaled up on the same chip by only adjusting one of the pump wavelengths. In addition, we give the on-chip design of projection measurement for characterizing GHZ states and show the reconfigurability of the state. Our proposal is rather simple and feasible within the existing fabrication technologies and we believe it will boost the development of multiphoton technologies.